12V & 24V Automotive Power Probe Circuit Tester Car Electrical System Analyzer

KZYEE KM601-12V & 24V Automotive Power Probe Circuit Tester. KM601 has multiple testing functions, including DC voltage, AC voltage, and AC Frequency, duty cycle, injection circuit detection, resistance, diode, manual activation Component and relay testing, battery testing, car start testing, car battery Charging test, etc. Among which AC voltage, AC frequency, duty cycle, and fuel injection detection can be passed Press the button to switch between waveform display and digital display. Vehicle battery electrical systems, and should. Household electric appliances; or, it will be damaged.

The LED and LCD pull no more than. Of current, therefore when using this device as a test light or multimeter, it is safe for computers and airbags. When powering-up components, you can increase the life of rocker switch in the tool if you first press the switch, and then contact the tip to the component.

The arcing will take place at the tip instead of the metal contacts of the rocker switch. Oscilloscope test function is mainly to test a variety of voltage signals, contains four kinds of functions, respectively, DC. Voltage test, AC voltage test, frequency test, duty cycle test, except DC voltage, the other three are. Except DC voltage, the other three have waveform display mode, which is part of the oscilloscope function. The multimeter test function module mainly tests resistor resistance and diode forward voltage.

Measurement function also contains a continuity test function, i. When the resistance of the tested wire is less than 30 ohms, the host. When the resistance of the tested wire is less than 30 ohms, the buzzer of the main unit will alarm, which is used to measure whether the wire is disconnected or not. Fuel Spray Nolle Test Module.

Injector test function module is mainly to test the parameters of the injector signal, and can be switched by pressing the key. Waveform display and digital display mode.

The Relay Test Function Module tests and helps to identify whether a vehicle relay is functioning correctly, primarily through relay test cables, auxiliary earth wires and probes. Battery test function module is mainly to test the car battery system, contains 3 functions, respectively, battery health test, battery start test, battery charging test, etc. So as to test the good or bad of the car battery. The component activation detection function is mainly used to activate automotive components by pressing a specific button to make the host probe connect to the positive pole of the car battery or ground, thus supplying power to the automotive components. The PN-TEST test function module functions in the same way as the diode test in the multimeter test module.

The setup module is used to set the host status, such as language selection, buzzer switch, instrument self-test, host upgrade and host version number. Product Technical Features and Advantages. 2 This instrument comes with a light-emitting diode, so that it can be used in the engine compartment and other dark places without being affected.

3 This instrument comes with a sharp probe and a crochet hook, so you can measure without removing the wiring. 4 This instrument can import positive or negative batteries to the probe, making it easy to power various appliances for testing without having to re-pull wires to power the appliances.

5Can simultaneously test the battery voltage and front-end probe voltage, battery voltage using the Kelvin test method, so that the measurement is more accurate, the front-end probe can measure the negative voltage. 6 AC voltage mode can be convenient to measure the true RMS value of the AC voltage. 7 Waveform display makes the instrument conveniently display the signal waveform, voltage, frequency, duty cycle, etc.

On the data line of the car. 8 Fuel injection mode makes it easy to capture fuel injection time, injector voltage and other data. (9) Resistance and on-off detection technology can easily detect the on-off of the car line, the size of the resistance value, etc. (10) Diode detection technology can detect the diode in the car electrical good or bad. (11) This instrument has a short circuit protection function.

If the device is overloaded, its internal circuit breaker will trip to effectively protect the instrument, prevent overload damage to the instrument. DC/AC Voltage :-110V +110 V.

Injector Detection : Voltage 0260V, Time 025ms. Relay test: automotive 4-leg or 5-leg common relays. 1 x 33FT Extension Cable. 1 x Long Probe Tip & Short Probe Tips. 1 x Battery Clip Cable.

1 x Relay Test Cable. 1 x Tool Storage Box.

1 x User's Manual. Carrier and Logistics: All Orders are. Free repair for the devices. OBDII Code Reader, Car Diagnostic Tool, Truck Diagnostic Tool, EVAP Smoke Machine, Car Power Probe, Battery Tester. The price is reasonable and we have top rated after-sales service.

And we also sell other brands product, such as.